ZIPWAKE DYNAMIC TRIM CONTROL SYSTEM - FOR INTEGRATION 25
13 NMEA 2000
When connected to an NMEA 2000
network, the Zipwake system can recieve
GPS data from compatible devices, and
transmit data to allow monitoring on e.g.
MFDs or plotters.
Refer to the NMEA 2000 documentation
at zipwake.com for more information
(transmitted and received signals etc.).
NOTE!
If multiple Zipwake control units (control panel(s) and integrator module) are installed,
only one of them should be connected to the NMEA 2000 network.
Backup the Auto Pitch Control Curve and settings to a mobile device (e.g smartphone,
tablet or laptop) for re-installation and/or to transfer settings between systems/boats.
12.6 IMPORT/EXPORT DATA
1. Tap to open the System Menu.
2. Tap Advanced Setup.
3. Tap File Imp/Exp.
4. Export or Import Pitch Curve or System
configuration, respectively. Follow the
steps.
NOTE!
We recommend that you do not use the
MFD file system for imports or exports.
To Next Page
Loading...
