ZIPWAKE DYNAMIC TRIM CONTROL SYSTEM - FOR INTEGRATION4
1 IMPORTANT INFORMATION
1.1 READING THE OPERATOR’S MANUAL
1.2 GENERAL SAFETY INSTRUCTIONS
1.3 SPECIAL OPERATING NOTES
The Trim Control System is an accessory that delivers a more comfortable boat ride,
better performance and improved fuel consumption. Keep in mind that it under no
circumstances takes away the responsibility from the helmsman to maneuver the boat in
a safe way.
Take your time to get familiar with the system and its functions in calm waters and get
used to how it will aect your boat’s handling before using it under normal conditions.
IMPORTANT
IMPORTANT
WARNING
WARNING The Trim Control System may aect your boat’s capacity to stay
on course. Always pay close attention to steering the boat.
WARNING Never try to force the interceptor blades by hand. Watch out for
sharp edges when close to the interceptors. Turn o the system
when the boat is docked, at anchor or hauled out of the water.
Make sure that you read and understand this Operator’s Manual before using the Dynamic
Trim Control System. If you have trouble understanding any part of the manual, please
contact your retailer for further information.
NOTE!
Information presented as a NOTE! is important information about the Trim Control
System’s operation and features.
The Dynamic Trim Control System should be the main system
controlling your boat’s running trim. If the boat has an outboard
engine or a sterndrive, their respective trim (propeller shaft
inclination) should be set to zero, except possibly at high speeds, or
if automatic control is added when necessary in addition to the basic
trim provided by the interceptors.
Information presented as IMPORTANT may lead to system or
property failure or damage if it is disregarded.
Information presented as a WARNING may lead to
personal injury if it is disregarded.
To Next Page
Loading...
