User Manual
Page | 10
Enter the User ID on the main screen to enter 1:1 fingerprint verification mode.
1. Enter the user ID and click [M/OK].
If the user has registered a face, a password and badge in addition to his/her fingerprints and the
verification method is set to password/ fingerprint/ badge/ face verification, the following screen will
appear. Select the fingerprint icon to enter fingerprint verification mode:
2. Press the fingerprint to verify.
The following screen displays on successful and failed verification respectively.
On successful verification On failed verification
Smart Access Control Terminal
To Next Page
Loading...
Need help?
General
