User Manual
Page | 47
Item Descriptions
Count Late On-duty
Set a time after which the lateness calculation for an employee should start.
If it is disabled, the lateness calculation starts with the start of working hours.
Count Leave Off-duty
Set a time before which the early leave calculation for an employee should
start. If disabled, it is calculated with respect to the end of the working hours.
Schedule Type
The device supports both department and individual-based scheduling.
If a company uses one timetable, then only one department needs to be set
and department-based scheduling is recommended.
If the departments have their respective timetables, department-based
scheduling is recommended.
If employees may take different shifts, individual-based scheduling is
recommended.
Default Shift
When individual-based scheduling is used, the default shift applies to all the
non-scheduled employees.
SAT On-duty
Enable whether to work normally on Saturdays.
SUN On-duty
Enable whether to work normally on Sundays.
Shift Setting
Select Shift Setting on the Shift set interface.
Select a Shift on the list, and press [M/OK].
Smart Access Control Terminal
To Next Page
Loading...
Need help?
General
