User Manual
Page | 8
Face Registration
Try to keep the face in the centre of the screen during registration. Please face the camera and stay still
during face registration. The screen looks like the image below:
Correct face registration and authentication method
Cautions for registering a face
When registering a face, maintain a 40cm to 80cm space between the device and the face.
Be careful not to change the facial expression. (smiling face, drawn face, wink, etc.)
If you do not follow the instructions on the screen, the face registration may take longer or may
fail.
Do not cover your eyes or eyebrows.
Do not wear hats, masks, sunglasses, or eyeglasses.
Be careful not to display two faces on the screen. It may create confusion and the registration
may fail.
A user wearing glasses should register their face both with and without glasses.
Cautions for authenticating a face
Ensure that the face appears inside the guideline displayed on the screen of the device.
For a person wearing glasses, try authenticating your face with glasses if glasses were used
while registering, or else authenticate without glasses if glasses were not used while
registration. Otherwise, the recognition may fail or can be difficult. Also, if a different pair of
glasses is used than the one used during registration, authentication can also fail. In such a case,
the previously worn glasses can be used for authentication.
If a part of the face is covered by a hat, a mask, an eye patch, or sunglasses, the authentication
may fail. Do not cover the face and allow the device to recognize the eyebrows and other
features of the face.
Smart Access Control Terminal
To Next Page
Loading...
Need help?
General
