User Manual
Page | 9
Verification Mode
1.4.1 Fingerprint Verification
1: N fingerprint verification mode
It compares the current fingerprint with all the fingerprint data that is available in the device. The device
enters the fingerprint authentication mode when a user presses his/her finger onto the fingerprint scanner.
Please follow the recommended way to place your finger onto the sensor. For details, please refer to 1.1
Finger Positioning.
The following screen displays on successful and failed verification respectively.
On successful verification On failed verification
1:1 fingerprint verification mode
It compares the current fingerprint with the linked fingerprints to the entered User ID via the virtual
keyboard. Users can try verifying their identity with 1:1 verification mode if they are unable to get access
with the 1:N authentication method.
Smart Access Control Terminal
To Next Page
Loading...
Need help?
General
