User Manual
Page | 63
15 Autotest
The auto test enables the system to automatically test whether the functions of various modules are working
normally, including the LCD, voice, sensor, keyboard, and clock tests.
Select Autotest option on the main menu interface.
Item Description
Test All
To automatically test whether the LCD, audio, camera and RTC are working normally.
Test LCD
To automatically test the display of the LCD screen by displaying all the color bands
including pure white and pure black to check whether the screen displays the colors
accurately.
Test Voice
To automatically test whether the audio files stored in the device are complete and
the voice quality is good.
Test Keyboard
The terminal tests whether every key on the keyboard works normally. Press any key
on the [Keyboard Test] interface to check whether the pressed key matches the key
displayed on the screen. The keys are displayed as dark grey before and turn blue
after pressed. Press [ESC] to exit the test.
Test
Fingerprint
Sensor
The terminal automatically tests whether the fingerprint collector works properly by
checking whether the fingerprint images are clear and acceptable. When the user
places his/her finger in the fingered guide, the collected fingerprint image displays
on the screen in real-time. Press [ESC] to exit the test.
Test Face
To test if the camera functions properly it checks the photos taken and determines if
they are clear enough.
Test Clock RTC
To test the RTC. The device checks whether the clock works normally and accurately
with a stopwatch. Touch the screen to start counting and press it again to stop
counting.
Smart Access Control Terminal
To Next Page
Loading...
Need help?
General
