ZKTeco ProFace X Series User Manual

ProFace X Series User Manual
Page | 53 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Display Body
Temperature
To enable or disable the display body temperature function.
When enabled, the device will display the user's specific temperature value
during the verification process.
Enable Mask
Detection
To enable or disable the mask detection function.
When it’s enabled, the device will identify whether the user is wearing a mask
or not during verification.
Deny Access
without
Mask
To enable or disable the deny access without mask function.
When it’s enabled, even if the body temperature is normal, the person who
does not wear a mask will not allow the person to enter.
Allow Unregistered
People to Access
To enable or disable the unregistered people to access function.
When enabled, as long as the person who passes the detection, the device
allows the personnel to enter without registration.
Enable Capture of
Unregistered
Person
To enable or disable the capture of unregistered person function.
When enabled, the device will automatically capture the photo of the
unregistered person, enabling this feature requires to enable Allow
Unregistered People to Access.
Trigger External
Alarm
★
When enabled, if the user's temperature is higher than the set threshold value
or the mask detection is enabled, but the mask is not worn by the person, it will
trigger an alarm.
Clear External
Alarm
★
It clears the triggered alarm records of the device.
External Alarm
Delay(s)
★
The delay (s) time for triggering an external alarm. It can be set in seconds.
Users may disable the function or set a value between 1 to 255.
Firmware Update
★
Choose whether to update the thermal imaging temperature detection module
software version.

ZKTeco ProFace X Series Specifications

General

Brand	ZKTeco
Model	ProFace X Series
Category	IP Access Controllers
Language	English