Zoom G11 User Manual

Adjusting the amp
Use the Amplier Section to adjust the amp selected with the patch memory.
1 2
AMPLIFIER display
1.
Press .
This turns the amp on/off. (It lights when on.)
The name of the selected amp is shown on the AMPLIFIER display.
2.
Turn .
These knobs adjust, from the left, the gain, bass frequencies, middle frequencies, treble frequencies,
presence and volume.
When adjusting the amp, parameter values are shown on the AMPLIFIER display.
NOTE
Items that can be adjusted depend differ according the selected amp.
HINT
Changing the amp (
→
“Changing amps and effects” on page24)
Adjusting the amp with the touchscreen
Touch on the Home Screen.
Amp name
Touch the switch to
change its setting.
Drag a knob up and
down to adjust it.
• The parameters that can be adjusted and set depend on the amp type. (Some parameters can only be adjusted
and set using the touchscreen.)
• Adjustments to the values of settings made in the Amplier Section are reected on the touchscreen.
27

Zoom G11 Specifications

General

Type	Multi-effects Processor
USB	1 x Type B
MIDI	In/Out
Software	Zoom Guitar Lab
Amp Models	22
Effects Types	Distortion, Modulation, Delay, Reverb, EQ
Looper	Yes
Display	Color LCD
Inputs	1 x 1/4" (instrument), 1 x 1/8" (aux in)
Outputs	1 x 1/4" (headphones)
Expression Pedal	Yes, built-in
USB Audio Interface	Yes
Power Supply	AC adapter (included)