Zoom G11 - Using an External Expression Pedal

Using an external pedal
When an external pedal is connected, two effects from the PEDAL category can be used.
You can set a pedal effect to be assigned to the connected pedal.
1.
Touch on the Home Screen.
2.
Touch the EXTERNAL PEDAL switch to turn it ON.
Touching this toggles it ON/OFF.
Setting Explanation
OFF External pedal use is disabled.
ON External pedal use is enabled.
3.
Select the patch memory for which you want to set an external pedal.
4.
Touch on the Home Screen.
The TAP icon will appear. Follow the procedures in “Adding effects” on page31 to add a pedal effect.
EXT will appear on the
pedal effect used with
the external pedal.
55