Zoom G11 - Loading Impulse Response Data

Loading impulse response (IR) data
You can load your own impulse response data and impulse response data from third parties.
NOTE
Impulse response data in the following format can be loaded.
• Format: WAV
• Sampling frequency: 44.1–192 kHz
1.
Copy the impulse response data to a USB ash drive.
2.
Connect the USB ash drive to the USB HOST port.
3.
Touch on the Home Screen.
4.
Touch for the location where you want to save it.
Impulse response data is already assigned to locations 001–070. You can assign impulse response data as
you like to 071–200.
5.
Touch the impulse response data that was assigned.
87