Terms used in this manual
Patch memory
Combinations of amps and effects with their on/off settings and parameter values can be saved as “patch
memories” for easy recall. Effects are saved and recalled in patch memory units. A single patch memory can
include up to nine effects and one amp model, and up to 240 patch memories can be saved.
Bank
One group of 4 patch memories is a “bank”. Patch memories can be quickly recalled by switching banks. Up to 60
banks can be saved.
Effect type
The available effect types include various guitar effects and amp/cabinet simulation models. Effects can be
selected from these types to be added to patch memories.
Category
Effects are grouped into categories by type.
Preselect
This function allows you to switch to a patch memory at any location while continuing to use the tone of the
currently selected patch memory.
AUTOSAVE
This function automatically saves changes to patch memory and effect settings.
ECO mode
This function will automatically turn the power off 10 hours after the last operation.
Looper
Stereo phrases that are up to 5 minutes long can be recorded and played back repeatedly.
Layering phrases enables various live performance techniques, including a cappella choruses and beatboxing.
4
To Next Page
Loading...
Need help?
General
