Zoom G11 - Configuring AUTOSAVE Function

Setting the AUTOSAVE function
When the AUTOSAVE function is ON, patch memories will be saved automatically when their contents are
changed.
1.
Touch or on the Home Screen.
2.
Touch the AUTOSAVE switch to set it to ON/OFF.
Touching this toggles it ON/OFF.
Setting Explanation
ON This turns on the AUTOSAVE function.
OFF This turns off the AUTOSAVE function.
HINT
Patch memories will not be saved automatically if the AUTOSAVE function is OFF.
When the content of a patch memory has been changed, the
icon will appear at the top right of the screen,
showing that it is different from the saved settings.
Touch this icon to open the patch memory saving screen, and save the settings as necessary. (
→
“Saving patch
memories” on page40)
95