Zoom G11 - Using Send and Return Loops; Connecting and Configuring External Effects

Using the sends and returns
External effects can be used by connecting them to the send and return jacks.
The send/return positions can be set as desired and saved in each patch memory.
Since there are two pairs of send/return jacks, two effects or a stereo effect can be used.
NOTE
The send/return is counted as one of the maximum number of the effects in the patch memory. (
→
“Number of
effects in patch memories” on page26)
1.
Select the patch memory in which you want to set a send/return.
2.
Touch on the Home Screen.
3.
Drag the TAP icon to the position where you want to set the send/return. Then, touch the icon.
4.
Touch the send/return setting. Then, touch OK.
Refer to the following applications when selecting the setting.
77