Adjusting effects
Use the Effects Section to adjust the individual effects used in a patch memory.
2
1
Effects Section
Effect typeCategory
1.
Turn to adjust an effect parameter.
The knob adjusts the parameter shown above it on the display.
Parameters that can
be adjusted and their
current settings
2.
If a patch memory uses six or more effects, press or to scroll the effects.
Up to ve effects can be adjusted in the Effects Section. If an effect that you want to adjust is not shown in
the Effects Section, scroll right/left to show it.
Effects that can be operated in
the Effects Section are shown
PLAY by EFFECT BOARD screen
28
To Next Page
Loading...
