Zoom G11 - Page 29

NOTE
• When the AUTOSAVE function is ON, changes to patch memories will be automatically saved. (This function is
ON by default.) (
→
“Setting the AUTOSAVE function” on page95)
• Patch memories will not be saved automatically if the AUTOSAVE function is OFF.
When the content of a patch memory has been changed, the
icon will appear at the top right of the touch-
screen, showing that it is different from the saved settings. Touch this icon to open the patch memory saving
screen, and save the settings as necessary. (
→
“Saving patch memories” on page40)
HINT
• Set Time, Rate and other effect parameters to musical notes to sync them to the tempo.
(
→
“Adjusting the master tempo” on page39)
• See Guitar Lab for the explanations of each effect.
• Changing effects (
→
“Changing amps and effects” on page24)
• Adding effects (
→
“Adding effects” on page31)
• Deleting effects (
→
“Deleting effects” on page33)
Large effects
Depending on the number of adjustable parameters, some effects use two parts of the Effects Section. These
are called “large effects.” In these cases, parameters span two parts in the Effects Section.
29