Managing patch memories
Saving patch memories
When the AUTOSAVE function is OFF (it is ON by default), effect and amp adjustments, level settings and other
changes are not saved automatically. In this case, they can be saved manually.
Patch memories can also be saved to different locations.
HINT
See “Setting the AUTOSAVE function” on page95 for details about the AUTOSAVE function.
1.
Select the patch memory that you want to save.
2.
Touch on the Home Screen.
3.
Save the patch memory.
█
Overwriting
Touch SAVE.
Patch memory to be saved
Save destination is highlighted
█
Saving to a different location
1.
Swipe up or down to show the save destination.
Save destinations are shown by bank.
Patch memory to be saved
40
To Next Page
Loading...
