Making patch memory MIDI transmission settings
MIDI transmission settings can be made for each patch memory.
1.
Select the patch memory for which you want to set MIDI transmission.
2.
Touch or on the Home Screen.
Set the MIDI data sent when a patch memory is selected
█
Setting the channel used to transmit MIDI data
Touch MIDI CH., and then touch the desired MIDI channel.
Set it to BASE to transmit on the channel set following the procedures in “Setting the channel used to
receive MIDI data” on page83.
█
Setting the type of MIDI data transmitted
Touch COMMAND, and then touch the desired type of MIDI data.
Setting Explanation
OFF No MIDI data is transmitted
PC Program change data is transmitted.
CC Control change data is transmitted.
81
To Next Page
Loading...
