Zoom G11 - Patch Memory Configuration

█
Adjusting the amp
Continue touching the amp for a while to open the amp settings screen. Follow the procedures in “Adjusting
the amp” on page27 to adjust the amp.
█
Making patch memory settings
Touch PATCH SETTINGS.
The following settings can be made.
Touch to change the patch memory name.
(
→
“Changing patch memory names” on page38)
Touch to set the patch memory MIDI output.
(
→
“Making patch memory MIDI transmission settings” on page81)
Drag to adjust the patch
memory volume.
(
→
“Setting the patch
memory level” on page37)
36