Zoom G11 - Page 52

2.
Adjust the pedal effect shown in the Effects Section.
Use the Effects Section parameter knobs to make adjustments. (
→
“Adjusting effects” on page28)
The PEDAL category
contains pedal effects.
Parameters that can
be adjusted and their
current settings
3.
Use the expression pedal.
This changes the application of the effect.
Pressing the front of the pedal turns the pedal effect ON/OFF. (When ON, the pedal indicator lights.)
NOTE
The on/off status of the pedal effect changed by pressing the front of the pedal is not saved. (The on/off status
changed by pressing the Effects Section footswitch is saved.)
52