Zoom G11 - Page 79

█
St.Send
A stereo signal will be sent to the external effect from the position set on the USE SEND/RETURN screen.
• A stereo signal will be sent from the SEND-1/2 jacks.
█
Return 1, Return 2
A signal will be returned from the external effect to the position set on the USE SEND/RETURN screen.
• Return 1: A signal will be returned to the RETURN-1 jack.
• Return 2: A signal will be returned to the RETURN-2 jack.
█
St.Return
A stereo signal will be returned from the external effect to the position set on the USE SEND/RETURN
screen.
• A Stereo signal will be returned to the RETURN-1/2 jacks.
NOTE
• To delete a send/return, see “Deleting effects” on page33.
• To change a send/return, see “Changing amps and effects” on page24.
HINT
Sends/returns can also be added on the CHANGE AMP/EFFECTS screen (
→
“Adding effects” on page31)
79