Zoom G11 - Page 84

█
Setting whether or not clock data is received from external MIDI devices
Touch the RECEIVE MIDI CLOCK switch to set it to ON/OFF.
Setting Explanation
OFF Data is not received.
ON
Data is received. (The
G11 will synchronize to the tempo of the external device.)
█
Setting whether or not clock data is transmitted to external MIDI devices
Touch the SEND MIDI CLOCK switch to set it to ON/OFF.
Setting Explanation
OFF Data is not transmitted.
ON
Data is transmitted. (An external device can be synchronized to the
G11 tempo.)
█
Setting how program change messages are received
Touch PROGRAM CHANGE MODE and then touch the desired mode.
Setting Explanation
BANK This should usually be selected.
DIRECT Select this when the external media device cannot send bank change messages.
84