Screens that appear on the display
The G2 FOUR/G2X FOUR is operated with buttons and knobs while viewing the display.
This section explains the screens shown on the display.
Memory Screen
This opens when the power is turned on.
This shows patch memories, allowing them to be selected for performing and editing.
❶
Patch memory numbers
Footswitches – can be used to select the patch memories that are shown currently.
Use / to select a patch memory one lower or higher. Use and to select a patch
memory 10 places away.
The selected patch memory is highlighted.
❷
Patch memory name
This shows the name of the selected patch memory.
Opening the Memory Screen
• When the MENU Screen or Effect Screen is open: Press .
• When the Library Screen is open: Confirm the selected effect to open the Effect Screen, and press
.
12
To Next Page
Loading...
Need help?
General
