Looper operations
Looper recording, playback and other operations can be conducted when the looper effect is shown on the
Effect Screen.
HINT:
• During looper recording and playback, it will continue recording or playing even if is
pressed to switch to the Memory Screen. In this case, switching the patch memory will stop recording/
playback.
• Pressing / to open the Library Screen will stop recording/playback and erase the recorded
data.
Recording loops
1. When a loop has not yet been recorded, press the – footswitch that corresponds to the
looper effect ( in this example).
Recording will start and the indicator will light.
Press the footswitch with the lit indicator 2 times to cancel recording.
71
To Next Page
Loading...
Need help?
General
