Copying and saving patch memories
The AUTO SAVE function is on by default. When it is off, changes, including adjustments to effects and
amps, as well as volume settings, will not be saved automatically. Save changes manually in this case.
Patch memories can also be saved (copied) to other locations.
HINT:
See “Setting the AUTO SAVE function” for details about the AUTO SAVE function.
1. Press and hold to open the MENU Screen.
2. Use / to select COPY, and press the corresponding footswitch ( in this example).
This opens the Copy Screen.
“SAVE” will be shown instead of “COPY” when the AUTO SAVE function is OFF (→Setting the AUTO SAVE
function), so select “SAVE”.
44
To Next Page
Loading...
