Terms used in this manual
Patch memory
Patch memories store effects and amps used, effect on/off states and parameter setting values, allowing
easy recall. Effects are saved and recalled in units of patch memories. A single patch memory can include
up to 6 effects plus 1 pedal effect. Up to 300 patch memories can be saved.
Effect type
The available effect types include various guitar effects and amp/cabinet simulation models. Effects can be
selected from these types to be added to patch memories.
Category
Effects are grouped by type into categories.
Auto save
This function automatically saves changes to patch memory and effect settings.
ECO mode
This function will automatically turn the power off 10 hours after the last operation.
Looper
Mono phrases that are up to 80 seconds long can be recorded and played back repeatedly.
This can be synchronized with rhythm patterns.
Preselect
This function allows continued use of the current patch memory sound while switching to another patch
memory at a distant number.
3
To Next Page
Loading...
Need help?
General
