Notes about the looper tempo
• The looper tempo is also used by effects and rhythms.
• The tempo can be set as explained in “Adjusting the tempo”.
• Changing the tempo will delete recorded loops in the following cases.
- If the looper recording time is set to ♩×1–64 (→Setting the recording time)
- If a rhythm is playing (→Using rhythms)
NOTE:
• If the rhythm pre-count function is on, recording will start after the pre-count. (→Setting the rhythm
effect)
• Sound input through the AUX IN jack will not be recorded.
HINT:
During rhythm playback (→Using rhythms), quantization is enabled so even if the recording ending time is
not exact, the loop will automatically be adjusted so that loop playback stays in time.
70
To Next Page
Loading...
