Zoom G2X FOUR - MENU Screen Options; Patch Memory Operations; System Settings

2. Use and to show the icon for the desired setting item.
See the reference links for details about each setting.
Change the effect order.
(→Changing the order of effects)
Change the patch memory name.
(→Changing patch memory names)
Save and copy patch memories.
(→Copying and saving patch
memories)
Delete patch memories. (→Deleting
patch memories)
Select the type of equipment
connected to the G2 FOUR/G2X
FOUR output. (→Selecting the type
of connected equipment)
Turn the automatic saving function
on/off. (→Setting the AUTO SAVE
function)
Turn the pre-selection function
on/off. (→Using the PRESELECT
function)
Turn the ECO mode on/off.
(→Setting the ECO mode)
Turn on/off showing of the output
setting at start-up. (→Changing the
start-up setting)
Adjust the display contrast.
(→Adjusting the display contrast)
Restore factory default settings.
(→Restoring factory default
settings)
Adjust the sensitivity of the built-in
expression pedal. (G2X FOUR only)
(→Calibrating the pedal (G2X FOUR
only))
Check the firmware versions.
(→Checking the firmware versions)
3. Press a – footswitch that corresponds to an icon.
This opens the selected settings screen.
For example, press when OUTPUT is selected.
16