3. Press / to open the Library Screen, and use , , and to select the
looper effect.
The looper effects are in the second column from the right (or rightmost when using an amp) on the
Library Screen. Choose either the MONO LOOPER or the STEREO LOOPER.
NOTE:
• The recording time for the mono looper is from 1.5 to 80 seconds (40 seconds when UNDO is ON).
• The recording time for the stereo looper is from 1.5 to 40 seconds (20 seconds when UNDO is ON).
4. Press .
This opens the Effect Screen.
65
To Next Page
Loading...
