ZyXEL Communications 1050 - Page 56

Chapter 5 Interfaces
ZyWALL (ZLD) CLI Reference Guide
56
5.2.5.2 OSPF Commands
This table lists the commands for OSPF settings.
[no] ip rip v2-broadcast Enables RIP-2 packets using subnet broadcasting.
The
no command uses multi-casting.
show rip {global | interface {all |
interface_name}}
Displays RIP settings.
Table 18 interface Commands: RIP Settings (continued)
COMMAND DESCRIPTION
Table 19 interface Commands: OSPF Settings
COMMAND DESCRIPTION
router ospf Enters sub-command mode.
[no] network interface_name area ip Makes the specified interface part of the specified
area. The
no command removes the specified
interface from the specified area, disabling OSPF
in this interface.
[no] passive-interface interface_name Sets the OSPF direction of the specified interface
to in-only. The
no command makes OSPF bi-
directional in the specified interface.
interface interface_name Enters sub-command mode.
[no] ip ospf priority <0..255> Sets the priority of the specified interface to the
specified value. The
no command sets the priority
to 1.
[no] ip ospf cost <1..65535> Sets the cost of the specified interface to the
specified value. The no command sets the cost to
10.
no ip ospf authentication Disables authentication for OSPF in the specified
interface.
ip ospf authentication Enables text authentication for OSPF in the
specified interface.
ip ospf authentication message-digest Enables MD5 authentication for OSPF in the
specified interface.
ip ospf authentication same-as-area Makes OSPF authentication in the specified
interface follow the settings in the corresponding
area.
[no] ip ospf authentication-key password Sets the simple text password for OSPF text
authentication in the specified interface. The
no
command clears the text password.
password: 1-8 alphanumeric characters or
underscores
ip ospf message-digest-key <1..255> md5
password
Sets the ID and password for OSPF MD5
authentication in the specified interface.
password: 1-16 alphanumeric characters or
underscores
no ip ospf message-digest-key Clears the ID and password for OSPF MD5
authentication in the specified interface.