ZyXEL Communications NBG6815 - 12.4 LAN IP Screen

Chapter 12 LAN
NBG6815 User’s Guide
102
Figure 66 LAN and WAN IP Addresses
The LAN parameters of the NBG6815 are preset in the factory with the following values:
• IPv4 address of 192.168.1.1 with subnet mask of 255.255.255.0 (24 bits)
• DHCP server enabled with 32 client IPv4 addresses starting from 192.168.1.33.
These parameters should work for the majority of installations.
12.4 LAN IP Screen
Use this screen to change the IP address for your NBG6815. Click Expert Mode > LAN > LAN IP.
Figure 67 Expert Mode > LAN > LAN IP
The following table describes the labels in this screen.
Table 35 Expert Mode > LAN > LAN IP
LABEL DESCRIPTION
IP Address Type the IP address of your NBG6815 in dotted decimal notation.
IP Subnet Mask The subnet mask specifies the network number portion of an IP address. Your NBG6815
will automatically calculate the subnet mask based on the IP address that you assign.
Unless you are implementing subnetting, use the subnet mask computed by the
NBG6815.