Chapter 15 Maintenance
NBG6815 User’s Guide
138
15.5 Time Screen
Use this screen to configure the NBG6815’s time based on your local time zone. To change your
NBG6815’s time and date, click Expert Mode > Maintenance > Time. The screen appears as
shown.
Figure 91 Expert Mode > Maintenance > Time
The following table describes the labels in this screen.
Apply Click Apply to save your changes back to the NBG6815.
Cancel Click Cancel to begin configuring this screen afresh.
Table 52 Expert Mode > Maintenance > Password (continued)
LABEL DESCRIPTION
Table 53 Expert Mode > Maintenance > Time
LABEL DESCRIPTION
Current Time and Date
Current Time This field displays the time of your NBG6815.
Each time you reload this page, the NBG6815 synchronizes the time with the time
server.
Current Date This field displays the date of your NBG6815.
Each time you reload this page, the NBG6815 synchronizes the date with the time
server.
Time and Date Setup
Manual Select this radio button to enter the time and date manually. If you configure a new
time and date, Time Zone and Daylight Saving at the same time, the new time and date
you entered has priority and the Time Zone and Daylight Saving settings do not affect
it.
To Next Page
Loading...
