NBG6815 User’s Guide
35
CHAPTER 6
Router Mode
6.1 Overview
The NBG6815 is set to router mode by default. Routers are used to connect the local network to
another network (for example, the Internet). In the figure below, the NBG6815 connects the local
network (LAN1 ~ LAN4) to the Internet.
Figure 26 NBG6815 Network
Note: After clicking Login, the Easy Mode appears. Refer to Chapter 5 on page 27 for
the Easy Mode screens. Change to Expert Mode to see the screens described in
the sections following this.
6.2 Router Mode Status Screen
Click Expert Mode > Status > System Status to open the status screen.
To Next Page
Loading...
