ZyXEL Communications NBG6815 - 11.3 Wireless Security

Chapter 11 Wireless LAN
NBG6815 User’s Guide
89
See the rest of this chapter for information on the other labels in this screen.
11.3 Wireless Security
The screen varies depending on what you select in the Security Mode field.
11.3.1 No Security
Select No Security to allow wireless clients to communicate with the access points without any
data encryption.
Note: If you do not enable any wireless security on your NBG6815, your network is
accessible to any wireless networking device that is within range.
Figure 56 Expert Mode > Wireless > Security Mode: No Security
Security Mode Select WPA2-PSK to add security on this wireless network. The wireless clients which
want to associate to this network must have same wireless security settings as this
device. After you select to use a security, additional options appears in this screen. See
Section 11.3 on page 89 for detailed information on different security modes. Or you can
select No Security to allow any client to associate this network without authentication.
Note: If the WPS function is enabled (default), only No Security and WPA2-PSK are
available in this field.
Apply Click Apply to save your changes back to the NBG6815.
Cancel Click Cancel to reload the previous configuration for this screen.
Table 25 Expert Mode > Wireless (continued)
LABEL DESCRIPTION