Chapter 13 Applications
NBG6815 User’s Guide
119
13.5 UPnP Screen
Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. A UPnP device can dynamically join a
network, obtain an IP address, convey its capabilities and learn about other devices on the network.
In turn, a device can leave a network smoothly and automatically when it is no longer in use.
Use this screen to enable UPnP on your NBG6815.
In Expert mode, click Applications > UPnP to open the following screen.
Figure 80 Expert Mode > Applications > UPnP
The following table describes the fields in this screen.
Apply Click Apply to save your changes back to the NBG6815.
Cancel Click Cancel to begin configuring this screen afresh.
Table 44 Expert Mode > Applications > USB Media Sharing (continued)
LABEL DESCRIPTION
Table 45 Expert Mode > Applications > UPnP
LABEL DESCRIPTION
UPnP Select Enable to activate UPnP. Be aware that anyone could use a UPnP application to
open the web configurator's login screen without entering the NBG6815's IP address
(although you must still enter the password to access the web configurator).
Display Select the page number from the drop-down list box to display the UPnP port mapping
rules.
UPnP Portmap Table
# This is the number of an individual UPnP entry.
Protocol This is the transport layer protocol used for the service.
In Port In Port is a port that a LAN computer uses when it requests a particular service. This
port is only applicable to the local network.
This field displays the port number of the UPnP entry.
To Next Page
Loading...
