ZyXEL Communications NBG6815 - Using Guest Ssids on the NBG6815

Chapter 8 Tutorials
NBG6815 User’s Guide
54
7 Check the status of your wireless connection in the screen below.
8 If the wireless client keeps trying to connect to or acquiring an IP address from the NBG6815, make
sure you entered the correct security key.
If the connection has limited or no connectivity, make sure the DHCP server is enabled on the
NBG6815.
If your connection is successful, open your Internet browser and enter http://www.zyxel.com or the
URL of any other web site in the address bar. If you are able to access the web site, your wireless
connection is successfully configured.
8.4 Using Guest SSIDs on the NBG6815
You can configure more than one guest SSID on a NBG6815. See Section 11.4 on page 92.
This allows you to configure multiple independent wireless networks on the NBG6815 as if there
were multiple APs (virtual APs). Each guest SSID has its own wireless security type. That is, each
SSID on the NBG6815 represents a different access point/wireless network to wireless clients in the
network.
Clients can associate only with the SSIDs for which they have the correct security settings. Clients
using different SSIDs can access the Internet and the wired network behind the NBG6815 (such as
a printer).