Chapter 8 Tutorials
NBG6815 User’s Guide
50
3 Click Start buttons (or button next to the PIN field) on both the wireless client utility screen and the
NBG6815’s WPS screen within two minutes.
The NBG6815 authenticates the wireless client and sends the proper configuration settings to the
wireless client. This may take up to two minutes. Then the wireless client is able to communicate
with the NBG6815 securely.
The following figure shows you the example to set up wireless network and security on NBG6815
and wireless client (ex. NWD210N in this example) by using PIN method.
Figure 36 Example WPS Process: PIN Method
8.3 Connect to NBG6815 Wireless Network without WPS
This example shows you how to configure wireless security settings with the following parameters
on your NBG6815 and connect your computer to the NBG6815 wireless network.
Follow the steps below to configure the wireless settings on your NBG6815.
WITHIN 2 MINUTES
Wireless Client
Access Point
Band 2.4GHz
SSID SSID_Example3
Channel 6
Security WPA2-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)
To Next Page
Loading...
