Chapter 5 Easy Mode
NBG6815 User’s Guide
32
5.6.2 Guest Wi-Fi
This screen allows you to configure guest wireless network settings on the NBG6815. Users
connected to the guest wireless network can access the Internet via the NBG6815, but not other
networks connected to the NBG6815.
See Chapter 11 on page 82 for how to enable and set up the
guest wireless network.
Figure 23 Easy Mode: Guest Wi-Fi
The following table describes the labels in this screen.
Security Mode Select WPA2-PSK to enable data encryption. Or Select No Security to allow wireless
clients to communicate with the access points without any data encryption.
Password This field appears when you choose wither WPA2-PSK as the security mode.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
Verify Password Type the password again to confirm.
Cancel Click Cancel to reload the previous configuration for this screen.
Apply Click Apply to save your changes back to the NBG6815.
Table 10 Easy Mode: Wi-Fi
LABEL DESCRIPTION
Table 11 Easy Mode: Guest Wi-Fi
LABEL DESCRIPTION
Wireless Radio Choose whether you want to apply the wireless settings to the 2.4G Hz or 5G Hz
wireless radio.
Network Name
(SSID)
The SSID (Service Set IDentity) identifies the Service Set with which a wireless client is
associated. Enter a descriptive name (up to 32 printable characters found on a typical
English language keyboard) for the guest wireless network.
Security Mode Select WPA2-PSK to enable data encryption. Or select No Security to allow wireless
clients to communicate with the NBG6815 without any data encryption.
To Next Page
Loading...
