ZyXEL Communications NBG6815 - Login Screen; Change Default Password Screen

Chapter 2 Introducing the Web Configurator
NBG6815 User’s Guide
15
2.2.1 Login Screen
Note: If this is the first time you are accessing the Web Configurator, you may be
redirected to the eaZy123 wizard. Refer to Chapter 3 on page 17 for the eaZy123
setup screens.
The Web Configurator initially displays the following login screen.
Figure 3 Login screen
The following table describes the labels in this screen.
2.2.2 Change Default Password Screen
You should see a screen asking you to change your password (highly recommended) as shown
next.
Table 2 Login screen
LABEL DESCRIPTION
Password Type "1234" (default) as the password. Click Login.