Chapter 11 Wireless LAN
NBG6815 User’s Guide
96
11.6 Advanced Screen
Use this screen to allow wireless advanced features, such as the output power, RTS/CTS Threshold
settings.
Click Expert Mode > Wireless > Advanced. The screen appears as shown.
Figure 62 Expert Mode > Wireless > Advanced
The following table describes the labels in this screen.
Apply Click Apply to save your changes back to the NBG6815.
Cancel Click Cancel to reload the previous configuration for this screen.
Table 31 Expert Mode > Wireless > MAC Filter
LABEL DESCRIPTION
Table 32 Expert Mode > Wireless > Advanced
LABEL DESCRIPTION
Wireless Advanced Setup
Band Select the frequency band to set whether you want to apply the wireless and security
settings to the default 2.4GHz or 5GHz wireless LAN.
RTS/CTS
Threshold
Data with its frame size larger than this value will perform the RTS (Request To Send)/
CTS (Clear To Send) handshake.
This field is not configurable and the NBG6815 automatically changes to use the
maximum value if you select 802.11n, 802.11an, 802.11gn or 802.11bgn in the
Expert > Wireless screen.
Fragmentation
Threshold
The threshold (number of bytes) for the fragmentation boundary for directed messages.
It is the maximum data fragment size that can be sent.
This field is not configurable and the NBG6815 automatically changes to use the
maximum value if you select 802.11n, 802.11an, 802.11gn or 802.11bgn in the
Expert > Wireless screen.
To Next Page
Loading...
