Chapter 8 Tutorials
NBG6815 User’s Guide
49
Note: Your NBG6815 has a WPS button located on its front panel, as well as a WPS button
in its configuration utility. Both buttons have exactly the same function; you can
use one or the other.
Note: It doesn’t matter which button is pressed first. You must press the second button
within two minutes of pressing the first one.
The NBG6815 sends the proper configuration settings to the wireless client. This may take up to
two minutes. Then the wireless client is able to communicate with the NBG6815 securely.
The following figure shows you an example to set up wireless network and security by pressing a
button on both NBG6815 and wireless client (the NWD210N in this example).
Figure 35 Example WPS Process: PBC Method
8.2.2 PIN Configuration
When you use the PIN configuration method, you need to use both NBG6815’s configuration
interface and the client’s utilities.
1 Launch your wireless client’s configuration utility. Go to the WPS settings and select the PIN method
to get a PIN number.
2 Enter the PIN number to the PIN field in the Expert > Wireless > WPS screen on the NBG6815.
Wireless Client
Access Point
SECURITY INFO
COMMUNICATION
WITHIN 2 MINUTES
WPS
To Next Page
Loading...
