Chapter 11 Wireless LAN
NBG6815 User’s Guide
99
11.8 Scheduling Screen
Use this screen to set the times your wireless LAN is turned on and off. Wireless LAN scheduling is
disabled by default. The wireless LAN can be scheduled to turn on or off on certain days and at
certain times. To open this screen, click Expert Mode > Wireless > Scheduling.
Or input station’s
PIN number
Use this button when you use the PIN Configuration method to configure wireless
station’s wireless settings.
Type the same PIN number generated in the wireless station’s utility. Then click Start to
associate to each other and perform the wireless security information synchronization.
WPS Status
Status This displays Configured when the NBG6815 has connected to a wireless network using
WPS or when WPS Enable is selected and wireless or wireless security settings have
been changed. The current wireless and wireless security settings also appear in the
screen.
This displays Unconfigured if WPS is disabled and there are no wireless or wireless
security changes on the NBG6815 or you click Release Configuration to remove the
configured wireless and wireless security settings.
Release
Configuration
This button is only available when the WPS status displays Configured.
Click this button to remove all configured wireless and wireless security settings for WPS
connections on the NBG6815.
802.11 Mode This is the 802.11 mode used. Only compliant WLAN devices can associate with the
NBG6815.
SSID This is the name of the wireless network (the NBG6815’s first SSID).
Security This is the type of wireless security employed by the network.
Apply Click Apply to save your changes back to the NBG6815.
Cancel Click Cancel to reload the previous configuration for this screen.
Table 33 Expert Mode > Wireless > WPS (continued)
LABEL DESCRIPTION
To Next Page
Loading...
