ZyXEL Communications NBG6815 - Internet Connection Screen; Ipoe Encapsulation

Chapter 10 WAN
NBG6815 User’s Guide
69
Auto-IP-Change only works under the following conditions:
• The NBG6815 must be in Router Mode (see Section 15.12 on page 147 for more information)
for Auto-IP-Change to become active.
• The NBG6815 is set to receive a dynamic WAN IP address.
10.4 Internet Connection Screen
Use this screen to change your NBG6815’s Internet access settings. Click Expert Mode > WAN >
Internet Connection.
10.4.1 IPoE Encapsulation
This screen displays when you select IPoE encapsulation.