Chapter 13 Applications
NBG6815 User’s Guide
109
The following table describes the fields in this screen.
13.2.1.1 Add/Edit a Parental Control Rule
Click Add new rules in the Parental Control screen to add a new rule or click the Edit icon next
to an existing rule to edit it. Use this screen to configure a restricted access schedule and/or URL
filtering settings to block the users on your network from accessing certain web sites.
Table 38 Expert Mode > Applications > Parental Control > General
LABEL DESCRIPTION
General
Parental
Control
Select Enable to activate parental control. Otherwise, select Disable to turn it off.
Add new rules Click this if you want to configure a new parental control rule.
Parental Control Rules
# This shows the index number of the rule.
Status This indicates whether the rule is active or not.
A yellow bulb signifies that this rule is active. A gray bulb signifies that this rule is not active.
User Name This shows the name of the user to which this rule applies.
Schedule This shows whether the user is able to access the Internet through the NBG6815 (Allow) or
not (Block) at the moment.
Modify Click the Edit icon to go to the screen where you can edit the rule.
Click the Delete icon to delete an existing rule.
Bonus If the user is currently not permitted to access the Internet, you can click the Bonus to
allow access for a specified period of time. A screen then displays allowing you to set how
long (in minutes) the user is allowed to access the Internet.
This button is grayed out if the user is now able to access the Internet.
Remaining
Time
This field displays the amount of Internet access time that remains for each user before the
NBG6815 blocks the user from accessing the Internet.
None means there is no extra Internet access time.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.
To Next Page
Loading...
