Chapter 13 Applications
NBG6815 User’s Guide
121
Figure 82 Expert Mode > Applications > File Sharing > SAMBA
The following table describes the labels in this screen.
Table 46 Expert Mode > Applications > File Sharing > SAMBA
LABEL DESCRIPTION
SAMBA Setup
Enable SAMBA Select this to enable file sharing through the NBG6815 using Windows Explorer or by
browsing to your work group.
Name Specify the name to identify the NBG6815 in a work group.
Work Group You can add the NBG6815 to an existing or a new workgroup on your network. Enter the
name of the workgroup which your NBG6815 automatically joins. You can set the
NBG6815’s workgroup name to be exactly the same as the workgroup name to which
your computer belongs to.
Note: The NBG6815 will not be able to join the workgroup if your local area network has
restrictions set up that do not allow devices to join a workgroup. In this case, contact
your network administrator.
Description Enter the description of the NBG6815 in a work group.
USB Access
USB1/USB2 Specify the user’s access rights to the USB storage device which is connected to the
NBG6815’s USB port.
Read & Write - The user has read and write rights, meaning that the user can create
and edit the files on the connected USB device.
Read - The user has read rights only and can not create or edit the files on the
connected USB device.
User Accounts Before you can share files you need a user account. Configure the following fields to set
up a file-sharing account.
# This is the index number of the user account.
To Next Page
Loading...
