EasyManua.ls Logo

ZyXEL Communications NBG6815 - Page 13

ZyXEL Communications NBG6815
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 1 Introduction
NBG6815 User’s Guide
13
Figure 2 Rear Panel
WAN White On The NBG6815’s WAN connection is ready.
Blinking The NBG6815 is sending/receiving data through the WAN.
Off The WAN connection is not ready, or has failed.
Internet White On The NBG6815 has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by a
DHCP server), PPP negotiation was successfully completed (if
used) and the connection is up.
Blinking The NBG6815 is sending or receiving IP traffic.
Off The NBG6815 does not have an IP connection.
5G WLAN White On The NBG6815 is ready and the 5GHz wireless LAN is on, but is
not sending/receiving data through the wireless LAN.
Blinking The NBG6815 is sending/receiving data through the wireless
LAN.
Off The wireless LAN is not ready or has failed.
2.4G WLAN White On The NBG6815 is ready and the 2.4GHz wireless LAN is on, but is
not sending/receiving data through the wireless LAN.
Blinking The NBG6815 is sending/receiving data through the wireless
LAN.
Off The wireless LAN is not ready or has failed.
WPS White On WPS is enabled. The NBG6815 is in the process of firmware
upgrading, configuration restoring, or resetting.
Blinking The NBG6815 is negotiating a WPS connection with a wireless
client.
Off WPS is disabled.
Table 1 Front Panel LEDs (continued)
LED COLOR STATUS DESCRIPTION
LAN 1-4
WAN

Table of Contents

Other manuals for ZyXEL Communications NBG6815

Related product manuals