Chapter 7 Access Point Mode
NBG6815 User’s Guide
44
The following table describes the labels shown in the Status screen.
Table 16 Expert Mode: Status > System Status: Access Point Mode
LABEL DESCRIPTION
Device Information
Host Name This is the System Name you enter in the Maintenance > General screen. It is for
identification purposes.
Model Number This is the model name of your device.
Firmware Version This is the firmware version and the date created.
Sys OP Mode This is the device mode (Section 4.1.2 on page 26) to which the NBG6815 is set - AP Mode.
LAN Information
MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
IP Address This shows the LAN port’s IP address.
IP Subnet Mask This shows the LAN port’s subnet mask.
DHCP This shows the LAN port’s DHCP role - Client or None.
IPv6 Address This shows the IPv6 address of the NBG6815 on the LAN.
WLAN 2.4G Information
WLAN OP Mode This is the device mode (Section 4.1.2 on page 26) to which the NBG6815’s wireless LAN is
set - Access Point Mode.
MAC Address This shows the 2.4GHz wireless adapter MAC Address of your device.
SSID This shows a descriptive name used to identify the NBG6815 in the 2.4GHz wireless LAN.
Channel This shows the channel number which you select manually.
Security This shows the level of wireless security the NBG6815 is using.
WLAN 5G Information
WLAN OP Mode This is the device mode (Section 4.1.2 on page 26) to which the NBG6815’s wireless LAN is
set - Access Point Mode.
MAC Address This shows the 5GHz wireless adapter MAC Address of your device.
SSID This shows a descriptive name used to identify the NBG6815 in the 5GHz wireless LAN.
Channel This shows the channel number which you select manually.
Security This shows the level of wireless security the NBG6815 is using.
System Status
Item This column shows the type of data the NBG6815 is recording.
Data This column shows the actual data recorded by the NBG6815.
System Up Time This is the total time the NBG6815 has been on.
Current Date/Time This field displays your NBG6815’s present date and time.
System Resource
- CPU Usage This displays what percentage of the NBG6815’s processing ability is currently used. When
this percentage is close to 100%, the NBG6815 is running at full load, and the throughput is
not going to improve anymore. If you want some applications to have more throughput, you
should turn off other applications (for example, using bandwidth management.)
- Memory Usage This shows what percentage of the heap memory the NBG6815 is using.
Interface Status
Interface This displays the NBG6815 port types. The port types are: LAN and WLAN.
Status For the LAN ports, this field displays Down (line is down) or Up (line is up or connected).
For the 2.4GHz/5GHz WLAN, it displays Up when the 2.4GHz/5GHz WLAN is enabled or
Down when the 2.4G/5G WLAN is disabled.
To Next Page
Loading...
