Chapter 5 Monitor
NXC Series User’s Guide
87
Figure 42 Monitor > Log > View AP Log
The following table describes the labels in this screen.
Table 45 Monitor > Log > View AP Log
LABEL DESCRIPTION
Show/Hide Filter Click this to show or hide the AP log filter.
Select an AP Select an AP from the list and click Query to view its log messages.
Log Query
Status
This indicates the current log query status.
init - Indicates the query has not been initialized.
querying - Indicates the query is in process.
fail - Indicates the query failed.
success - Indicates the query succeeded.
AP Information This displays the MAC address for the selected AP.
Log File Status This indicates the status of the AP’s log messages.
Last Log Query
Time
This indicates the last time the AP was queried for its log messages.
Display Select the log file from the specified AP that you want displayed.
Note: This criterion only appears when you Show Filter.
Priority Select a priority level to use for filtering displayed log messages.
Note: This criterion only appears when you Show Filter.
Source Address Enter a source IP address to display only the log messages that include it.
Note: This criterion only appears when you Show Filter.
To Next Page
Loading...
