Chapter 5 Monitor
NXC Series User’s Guide
88
Destination
Address
Enter a destination IP address to display only the log messages that include it.
Note: This criterion only appears when you Show Filter.
Source Interface Enter a source interface to display only the log messages that include it.
Note: This criterion only appears when you Show Filter.
Destination
Interface
Enter a destination interface to display only the log messages that include it.
Note: This criterion only appears when you Show Filter.
Service Select a service type to display only the log messages related to it.
Note: This criterion only appears when you Show Filter.
Keyword Enter a keyword to display only the log messages that include it.
Note: This criterion only appears when you Show Filter.
Protocol Select a protocol to display only the log messages that include it.
Note: This criterion only appears when you Show Filter.
Search Click this to start the log query based on the selected criteria. If no criteria have been
selected, then this displays all log messages for the specified AP regardless.
Email Log Now Click this open a new e-mail in your default e-mail program with the selected log attached.
Refresh Click this to refresh the log table.
Clear Log Click this to clear the log on the specified AP.
# This field is a sequential value, and it is not associated with a specific log message.
Time This indicates the time that the log messages was created or recorded on the AP.
Priority This indicates the selected log message’s priority.
Category This indicates the selected log message’s category.
Message This displays content of the selected log message.
Source This displays the source IP address of the selected log message.
Destination This displays the source IP address of the selected log message.
Note This displays any notes associated with the selected log message.
Table 45 Monitor > Log > View AP Log
LABEL DESCRIPTION
To Next Page
Loading...
