ZyXEL Communications P-660HN-51 - Using Upnp in Windows XP Example

Chapter 7 Home Networking
P-660HN-51 User’s Guide
100
Networking Services
6 Click OK to go back to the Windows Optional Networking Component Wizard window and click Next.
7.6 Using UPnP in Windows XP Example
This section shows you how to use the UPnP feature in Windows XP. You must already have UPnP installed
in Windows XP and UPnP activated on the Zyxel Device.
Make sure the computer is connected to a LAN port of the Zyxel Device. Turn on your computer and the
Zyxel Device.
Auto-discover Your UPnP-enabled Network Device
1 Click Start and Control Panel. Double-click Network Connections. An icon displays under Internet
Gateway.
2 Right-click the icon and select Properties.